Gate Company in Powell - Same-Day Service, Priced Before We Start

Same-day gate service with the price agreed before we start. Licensed and insured technicians covering repairs, operators and access control across the whole service area.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 361-6964

We answer 24/7

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Company in Powell, TN

Powell sits where Knoxville’s suburbs thin out into East Tennessee acreage, and that shapes every gate job we see here. A newer subdivision lot with a swing gate on a brick entry column and a hobby farm off a ridge with a field gate on a leaning post are both Powell problems, and they call for different fixes. We handle gate installation and repair across that whole range. Our technicians have up to experience with the brands that actually show up on Powell properties. Call (866) 361-6964 to set up a free estimate.

Call (866) 361-6964

Why Powell Homes Are Different

The 37849 ZIP mixes newer subdivision builds with older rural-residential parcels, and the county’s climate treats gate hardware hard. Humid summers, freeze-thaw swings through winter, and heavy spring storms go after the posts more than the gates. Wood posts heave and rot at the ground line, steel posts rust and shift, and thunderstorm wind bends lighter aluminum and chain-link panels. On the older parcels off the ridges, gates often hang on wooden or T-posts set decades ago. They twist and lift, and the gate ends up not latching because the post moved, not the gate itself. That changes the diagnosis. You are not always replacing a part you can order; you are often re-plumbing a frame that never matched anything standard to begin with.

Housing stock runs from mid-century and 1970s-90s brick ranch and split-foyer homes along Emory Road to newer subdivision houses, plus rural properties with outbuildings, barns and fenced pasture. Older posts beside aging brick piers behave differently than a fresh install on a graded lot. Some neighborhoods have HOA rules about gate style, height and finish, and it’s worth reading those before you pick a panel or an operator brand. On the rural side, fence-line and field-entrance gates live on long driveways where the original installer is gone, so the parts underneath don’t match the labels on top. We’re used to walking that back and figuring out what’s actually there.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Main Powell Services

Two things bring Powell property owners to the phone more than anything else: a gate that won’t open or won’t stay closed, and an automated system that’s stopped responding.

Gate Repair in Powell

Most Powell repairs start with movement. A gate that drags, rides low, or won’t catch is usually telling you the post has heaved or the hinge has worn, not that the gate itself is finished. On the older rural-residential parcels, the original installer is long gone and the hardware is a mix, so we reverse-engineer what’s on the gate before we touch it. Wind from summer storms bends lighter panes and knocks tracks out of line. If yours is stuck open, treat it as a security gap and call. If it’s stuck closed, it’s an access problem. Either way, our gate repair work starts with a look at the posts, frame, hinges and latches before anyone quotes a part.

Gate Repair in Powell

Electric Gate Repair in Powell

Automated gates fail at the operator, the control board, the sensors or the wiring, and we diagnose all four rather than sending you to a dealer. Freeze-thaw movement can throw a limit switch out of range, and a gate that closes halfway and reverses is often a loop detector reading a shifted slab or a safety edge out of alignment. We work on residential openers and heavier commercial-grade systems, including LiftMaster and DoorKing units. Our electric gate repair focuses on what your system actually needs, not what’s easiest to swap. If a board is repairable, we’ll say so, and we’ll quote before any work starts.

Electric Gate Repair in Powell
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 361-6964

Gate Installation in Powell

Gate installation in Powell means matching hardware to a site that hasn’t always been friendly to it. A lot graded two decades ago may have shifted, and a brick entry pier built in the 1980s may not be square to the driveway now. Powell’s freeze-thaw cycle moves posts, so footing depth and post alignment matter more here than the operator brand. That’s the whole reason we do a free measure and a written price before anything is ordered. Our technicians have up to experience with residential and commercial systems, and we cover full gate installation for new builds and system upgrades so you don’t need a second contractor later.

Automatic Gate Installation

Signs you need it

You’re adding a driveway gate, replacing an old manual gate that’s getting hard to swing, or your existing operator has reached the end of a reasonable repair path.

What it costs in Powell

Installation is priced per job after a free measure, and most Powell driveway installations land in a typical range of $3,200 to $8,500 depending on span, material and operator choice.

How we do it

We measure the opening, confirm post depth and footing against your soil and grade, set and align the posts, hang the gate, then mount the operator, run the power and set the safety edges before we test the full open and close cycle.

Driveway Gate Installation

Signs you need it

Your driveway entry was never gated, the existing gate is bent or rusted through on aging posts, or you’re changing from a farm-style field gate to something that closes off the property line.

What it costs in Powell

Typical residential driveway gate installation in Powell runs from $2,400 to $7,200 for the gate and hardware, with automation on top of that depending on the operator you pick.

How we do it

We lay out the swing or slide path against the actual driveway slope, pour or set footings to proper depth, hang the gate so it clears on both ends through the full arc or track, and then add the operator and safety devices if you want automation.

What Gate Installation Costs in Powell

Every job is priced per job by a written estimate, and the figure you see holds until you approve it. Here’s what typical Powell installations look like before we’ve measured your site.

Item Typical range in Powell
Manual swing or slide gate installation $2,400 – $7,200
Automatic gate installation with operator $3,200 – $8,500
Electric gate installation, power run and safety edges included $3,800 – $9,500

How long does gate installation take in Powell?

Most residential installations take a day for the gate and hardware and a second day if you’re adding an operator with a power run. Older Powell lots with shifted grade or uncertain post depth can push that to three days. We confirm the schedule in the written estimate.

Do you handle the power run and the safety edges?

Yes. Electric gate installation includes the power run to the operator and the safety edges or loop detectors that make the gate safe for vehicles and people. We test the full cycle before we leave. Call (866) 361-6964 for a free estimate.

Questions about your gate repair?Free estimate, price agreed before work starts
Call (866) 361-6964

Can you match an existing gate style on a subdivision lot?

Often, yes. We can match panel style, picket spacing and finish on newer subdivision lots where a gate has to fit HOA rules. For older properties we tell you honestly what can and can’t be matched, and we quote both paths in the written price.

Brands We Service in Powell

We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule systems, from DIY-adjacent residential openers to industrial-grade access equipment. We don’t claim to stock parts for any of them; what we do is diagnose what’s actually on your gate and source the right component. Turnaround depends on the part and the brand, and we tell you that up front. You can see the full coverage list on our brands page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (866) 361-6964

Pricing for Gate Company in Powell, TN

These ranges are typical for Powell work, and the written estimate sets your final price. Nothing gets ordered or installed until you’ve agreed to the number.

Service Typical range in Powell
Manual swing or slide gate installation $2,400 – $7,200
Automatic gate installation with operator $3,200 – $8,500
Electric gate installation, power run and safety edges included $3,800 – $9,500

Two things push the number up in Powell more than anything else: post work on older rural-residential parcels where the footing has shifted, and the choices you make on operator brand and material. A heavier steel slide gate on a long rural driveway costs more than a lighter aluminum swing gate on a subdivision lot. We quote the price before any work starts so the invoice matches the number you approved.

Neighborhoods We Serve in Powell

We work gates across Powell, from the older core along Emory Road out to the rural-residential parcels off the ridges. Where a property sits on the fringe, we plan the visit around the drive rather than quoting you a different service.

  • Emory Road corridor
  • Subdivision lots in the 37849 ZIP
  • Rural-residential parcels off the ridge lines
  • Hobby-farm and small horse properties

Same-day repair work is common in Powell when the schedule allows. Call (866) 361-6964. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Service Area – Cities Near Powell

Powell borders Knoxville on the north side, and we work the surrounding towns as well. If you’re outside Powell proper, we cover Knoxville, TN, Halls, TN, Clinton, TN and Oak Ridge, TN for both gate repair and installation. The gate setup across the region is similar, so the diagnosis tends to follow the same pattern: posts first, then operator, then the panel. Call (866) 361-6964 for a free estimate and we’ll book you into the next opening.

Serving Powell, TN – Our Local Coverage Area

We serve Powell and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Gate Company in Powell

Ready to get started? Free estimates · 60-minute response in Powell
Call (866) 361-6964

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Powell Customers Say

★★★★★ 4.7 from 7+ reviews

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

- Emily Ackerman

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Brooke Whitaker

"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."

- Danika Bryant

How It Works in Powell

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Powell - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Powell. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7