Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Oak Ridge, TN
If you’re putting in a new automatic driveway gate in Oak Ridge, the job starts with measuring an opening that probably wasn’t designed for one. Hundreds of the city’s homes went up during the Manhattan Project years, and their narrow single-car driveways and small front yards don’t leave the clearance a modern suburban lot does. We install and repair gates on those older openings every week, and we work on the specific operator already on your property rather than pushing a replacement you don’t need. Call (866) 361-6964 for a free estimate.
Why Oak Ridge Homes Are Different
Oak Ridge is not a typical East Tennessee suburb, and gate work here shows it. The city’s signature housing is the Alphabet Homes – the A, B, C and D models built between 1943 and 1945 for Manhattan Project workers – and hundreds of them are still standing on their original lots. The driveways are narrow, the front yards are modest, and the swing clearances are tighter than anything a modern builder would pour. That changes what we can hang and how an operator has to be set up.
The posts are the other half of the story. In the older neighborhoods, many gates are still hung on the 1940s concrete or cinder-block posts poured for that wartime housing, and they’ve been holding hinges for more than eighty years. When a hinge pulls loose, re-anchoring hardware into aging masonry is often the real repair, not swapping the hinge itself. Add East Tennessee’s humid subtropical climate on top: freeze-thaw cycles heave and crack wooden posts each winter, heavy spring rain rots them, and summer humidity swells wooden frames and rusts metal ones. Fences and gates here are usually lightweight wood or chain-link, which tolerates that cycle better than heavy ornamental steel when it’s set and anchored correctly. If your property sits in one of the city’s historic districts, the design guidelines for those areas affect what a new gate can look like, and that’s worth checking before you order anything.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Oak Ridge Services
Two things bring Oak Ridge property owners to the phone most often: a gate that’s stopped working, and a driveway that needs one for the first time.
Gate Repair in Oak Ridge
Most repair calls here come down to hardware fighting an old opening. A gate that drags, sags or won’t latch is usually telling you the post has moved, the hinge has pulled, or the frame has swelled with the season. We look at how the gate was hung before we touch the operator, because fixing the swing often solves what looked like an electrical problem. Aging masonry posts get re-anchored rather than patched over. We handle swing and slide gates, wood and chain-link, residential and commercial. For the full breakdown of what we fix and how, see Gate Repair in Oak Ridge.

Electric Gate Repair in Oak Ridge
When an automatic gate stops responding, the fault is usually in the control board, a loop detector, a safety edge or the wiring between them – not the gate itself. We diagnose the electronics on the operator platform you actually have, whether that’s a residential LiftMaster arm or a heavier commercial FAAC or BFT system. A gate stuck open is a security gap; stuck closed, it’s an access problem for every vehicle on the property. We work on operators, boards, sensors and low-voltage wiring directly. Details are on our Electric Gate Repair in Oak Ridge page.

Gate Installation in Oak Ridge
Installing a gate in Oak Ridge means fitting modern hardware to openings that were laid out for 1940s cars. The Alphabet Homes and early Atomic City tract homes often have a driveway barely wider than a single vehicle, with the gate post sitting close to the house or the property line, so swing clearance and gate width have to be measured against what’s actually there rather than assumed. Our Gate Installation work starts by mapping that opening, checking the condition of the original posts, and choosing an operator that suits the weight and travel of the gate instead of forcing the gate to suit the operator. Between the freeze-thaw heaving that shifts posts each winter and the humidity that swells wooden frames in summer, a gate that’s installed with the right footing depth and the right clearances is a gate that keeps working through both. We install and repair under one roof, so the system you buy now is the system we can service later without a second contractor.
Automatic Gate Installation
Signs you need it
You’re tired of getting out to open the gate every time, or the property needs controlled entry that a manual latch can’t provide.
What it costs in Oak Ridge
A typical automatic gate installation in Oak Ridge runs from about $2,500 to $5,500, with the operator and access control usually accounting for the difference.
How we do it
We measure the opening, confirm footing depth and swing or slide clearance, set the posts and gate, then mount and program the operator and safety devices, and test the full cycle before we leave.
Driveway Gate Installation
Signs you need it
Your drive has no gate and you want privacy, security, or a boundary that keeps vehicles where they belong.
What it costs in Oak Ridge
Driveway gate installation here typically falls between $2,000 and $5,000, depending on width, material and whether an operator is included.
How we do it
We check the driveway layout and original post condition, select a gate that fits the available clearance, anchor it into sound footing or re-anchored masonry, and set the stops and latches.
What Gate Installation Costs in Oak Ridge
| Item | Typical range in Oak Ridge |
|---|---|
| Automatic gate installation (gate plus operator) | $2,500 – $5,500 |
| Driveway gate installation | $2,000 – $5,000 |
| New operator on an existing gate | $900 – $2,200 |
Do I need a permit to install a gate in Oak Ridge?
Most cities require a permit for a new gate and especially for the electrical work that powers an operator, so check with Oak Ridge’s building department before you order. If you’re in a historic district, the design guidelines apply too.
Can you install a gate on my original 1940s driveway?
Usually yes. The Alphabet Homes and early tract homes have narrow driveways and tight clearances, so we measure the opening and check the condition of the original posts first, then fit a gate and operator to what’s there.
Brands We Service in Oak Ridge
We work on the brand on your property, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule – residential openers through commercial access systems. Most repairs are handled on the first visit once we’ve identified the platform. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Oak Ridge, TN
| Service | Typical range in Oak Ridge |
|---|---|
| Automatic gate installation | $2,500 – $5,500 |
| Driveway gate installation | $2,000 – $5,000 |
| New operator on an existing gate | $900 – $2,200 |
| Slide gate installation | $2,800 – $6,000 |
| Gate repair | $150 – $600 |
| Electric gate repair (operator, board, sensors) | $200 – $800 |
| Control board replacement | $300 – $700 |
| Loop detector replacement | $250 – $550 |
| Hinge and hardware re-anchoring | $150 – $450 |
What pushes price up in Oak Ridge is usually the opening itself: re-anchoring into aging masonry, working around a narrow driveway that limits gate width, and choosing an operator that handles the weight of a heavier gate. We quote the job before any work starts, and the written estimate sets the final price.
Neighborhoods We Serve in Oak Ridge
We reach properties across Oak Ridge, from the original town site out through the post-war brick ranch neighborhoods, and the older streets take a little longer to work simply because the openings are tighter and the posts are older. For most of Oak Ridge, fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician moving the same day you call. Areas we cover include:
- Around the original town site and Alphabet Homes streets
- Woodland and the older central neighborhoods
- Post-war ranch areas off the main corridors
- Properties with commercial and multi-access entries
- Historic district homes under design guidelines
Service Area – Cities Near Oak Ridge
Oak Ridge sits within easy reach of the wider Knoxville area, and we cover gate installation and repair across the region. If you’re just outside the city, we likely still reach you. Nearby communities we serve include Clinton, TN, Powell, TN, Farragut, TN and Knoxville, TN. For the main hub, see Gate Repair Knoxville. Call to confirm coverage for your address.
Serving Oak Ridge, TN – Our Local Coverage Area
We serve Oak Ridge and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Oak Ridge
We offer same-day service where the schedule allows, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 361-6964 and we’ll book the soonest opening for your address.
We can talk through what your HOA or historic district requires before installation, since Oak Ridge’s design guidelines can affect gate style and materials. We don’t approve anything on your behalf – you’ll want your HOA’s sign-off and the city’s permit first.
Yes. We work on residential driveway gates and on commercial and multi-access entries, including DoorKing and FAAC systems. Loop detectors, control boards and safety edges are handled directly rather than referred out.
Whether you’re installing a gate on a 1940s driveway or getting an operator back online, call (866) 361-6964 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to experience, and the price is quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Oak Ridge Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Emily Ackerman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Brooke Whitaker"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Danika Bryant