Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Clinton, TN
If you need a gate installed on a Clinton property, the job starts with the ground under it, not the gate itself. Clinton’s driveways climb ridges and cut through woods, and the Clinch River valley funnels storms that punish anything set shallow. We install driveway, swing, slide and automatic gates across Clinton and the surrounding Ridge and Valley country, and we handle electric gate repair and gate repair too. Our technicians have up to experience. Call (866) 361-6964 for a free on-site estimate.
Why Clinton Homes Are Different
Clinton sits in a fold of the East Tennessee Ridge and Valley, where the Clinch River and the surrounding ridges channel heavy summer storms and winter ice across the same ground. That shape of the land decides most of the gate work here. Driveways off the ridges in 37716 are sloped and wooded, and the posts that hold a gate on those drives sit in clay-heavy soil. After a winter of freeze-thaw, wood swells, fasteners work loose and gates sag and bind. On exposed hilltop drives, ice load does its own damage.
The housing stock shapes the hardware. Early-20th-century mill and bungalow homes near downtown often carry aged wood or chain-link gates on uneven drives. The brick ranches that spread out through the 1970s, 80s and 90s added more of the same, and newer rural-edge builds on larger wooded lots tend to arrive with ornamental steel driveway gates. Straight-line wind gusts fatigue fasteners on all of it. This is not the flat-lot suburban gate work you’d see in nearby Oak Ridge or Knoxville, and installing for Clinton means speccing for the slope, the soil and the ice from the start.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Clinton Services
Most Clinton calls come down to two jobs: getting a failing gate working again, and getting a new one set properly on the drive. Here’s what each involves locally.
Gate Repair in Clinton
Repair work on Clinton gates usually starts with the post, not the hinge. Sloped, wooded drives in clay soil let posts shift through freeze-thaw, and the gate sags, drags and binds against the latch within a season. We check post set and footing depth before we touch hardware, then deal with swollen wood, worn hinges, bent frames and tired rollers. Storm-wind damage to fasteners is the other steady call. A gate stuck open on a wooded lot is a security gap overnight, so we treat it that way. For the full picture of what we fix, see Gate Repair in Clinton.

Electric Gate Repair in Clinton
When an automatic gate stops mid-swing, the fault is usually in the operator, control board, loop detector or the wiring between them, and that’s the work we do rather than refer out. Clinton’s storm seasons are hard on outdoor control enclosures and on the low-voltage runs feeding safeties, so we test the whole circuit instead of swapping parts until something works. LiftMaster and FAAC systems are common on local driveways, and Mighty Mule setups turn up on rural-edge lots. More detail sits on our Electric Gate Repair in Clinton page.

Gate Installation in Clinton
Gate installation in Clinton means fitting the gate to a slope, a soil type and a storm season, not dropping a kit on flat ground. The older mill-era homes near downtown and the brick ranches out through the 70s, 80s and 90s often have drives that were never built with an automatic gate in mind, so the operator, the posts and the power all get worked out against the real grade. Newer rural-edge properties on wooded lots raise a different question: how the gate swings clear of trees and how it holds up when ice loads the frame.
We install as well as repair, so the same people who set your gate are the ones you call when it acts up later. If you want the full breakdown of how we approach a project, our Gate Installation page covers it. Estimates are free, and the price is quoted and agreed before any work starts.
Automatic Gate Installation
An automatic gate on a Clinton drive brings the operator, the power run and the safety devices together as one system, sized to the gate and the grade it moves on.
Signs you need it
You’re opening a heavy driveway gate by hand every trip, or the old operator has quit and the parts to revive it aren’t worth chasing.
What it costs in Clinton
Automatic gate installation typically runs $2,500-$6,500 for a residential swing system, with commercial-grade and slide systems estimated per job.
How we do it
We measure the opening and check the grade and soil, agree a written price, set posts to proper footing depth, hang the gate, mount the operator, run power and set the safety edges and loop detectors before we hand it over.
Driveway Gate Installation
Driveway gates here live on slopes and in wind, so the post set and the frame choice do most of the work of keeping the gate true.
Signs you need it
The existing gate drags on the ground, a post has heaved out of line after a freeze, or the drive has no gate and you want the entrance defined and secured.
What it costs in Clinton
Driveway gate installation typically runs $1,800-$5,500 depending on width, material and whether it’s automated.
How we do it
We walk the drive, confirm footing depth against the clay soil, set the posts, hang a steel or wood gate built for the span, and check the swing or slide travel through its whole arc before final adjustment.
What Gate Installation Costs in Clinton
| Item | Typical range in Clinton |
|---|---|
| Driveway gate installation | $1,800-$5,500 |
| Automatic gate installation (residential swing) | $2,500-$6,500 |
| Electric gate installation (operator, controls, safety devices) | $1,200-$4,500 |
Can you install an automatic gate on a sloped Clinton driveway?
Yes. Sloped drives are the norm here, so we set posts to proper footing depth in the clay and check the operator against the actual grade. The on-site estimate confirms what your specific slope needs.
Do you handle the power run and the safety edges during installation?
Yes. We run the power to the operator and fit the safety edges and loop detectors as part of the job, then test them before we finish. Nothing is left for you to coordinate with another trade.
Brands We Service in Clinton
We work on the brand already installed on your property, including LiftMaster, FAAC, BFT and Mighty Mule, spanning residential openers up to commercial access systems. We don’t carry a conflict of interest with any single manufacturer, and we don’t stock parts – we diagnose first and order what your system actually needs. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Clinton, TN
| Service | Typical range in Clinton |
|---|---|
| Driveway gate installation | $1,800-$5,500 |
| Automatic gate installation (residential swing) | $2,500-$6,500 |
| Electric gate installation (operator, controls, safety devices) | $1,200-$4,500 |
| Gate repair (hinges, latches, posts, frames) | $150-$450 |
| Electric gate repair (operator or control board) | $200-$650 |
| Loop detector or safety sensor repair | $180-$400 |
In Clinton, price moves with the ground and the grade. A shallow post that has to be reset to proper footing depth in clay soil, a slope that needs a heavier operator, or a wooded drive that needs the gate re-hung clear of trees all add labor a flat-lot job never sees. The written estimate sets the final price, and we agree it with you before any work starts.
Neighborhoods We Serve in Clinton
We install and repair gates across Clinton, from the older streets near downtown out to the rural-edge properties on the ridges. The sloped, wooded drives in 37716 are the ones we see most, and they’re where shallow posts and freeze-thaw damage tend to show up first. Wherever your property sits in Clinton, we book the visit around your schedule. We answer 24/7, and fast dispatch runs 7am-7pm, Sunday through Friday.
- Downtown Clinton and the older mill-era streets
- Rural-edge properties off the ridges in 37716
- Brick ranch neighborhoods on the city’s edges
- Wooded lots on the surrounding hillsides
Service Area – Cities Near Clinton
Clinton sits north of Knoxville, and our gate work reaches the towns around it, including Oak Ridge, TN, Powell, TN, Halls, TN and Knoxville, TN. Each has its own ground and grade, and we spec the gate to the site rather than the zip code. If you’re just outside Clinton and want to know whether we cover your drive, call and ask.
Serving Clinton, TN – Our Local Coverage Area
We serve Clinton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clinton
We answer 24/7, and fast dispatch runs 7am-7pm, Sunday through Friday. Clinton is a short run from Knoxville, so we can often schedule a free estimate or a repair visit quickly. Same-day service is available for repair work.
Many cities require a permit for a new gate, fence or driveway structure, so ask Clinton’s building department about your specific project. If your property is under an HOA, check the rules on gate height, style and setbacks before ordering material.
Yes. We serve the whole of Clinton, including the older streets near downtown and the rural-edge properties off the ridges, plus the neighboring towns. Call with your address and we’ll confirm coverage and book a free estimate.
Call (866) 361-6964 for a free estimate. We answer 24/7, and fast dispatch runs 7am-7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Clinton Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Emily Ackerman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Brooke Whitaker"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Danika Bryant