Electric Gate Repair in Knoxville, TN | Gate Repair Knoxville

Electric Gate Repair in Knoxville - Same-Day Repair, Priced Before We Start

Most gate faults are diagnosed and fixed on the first visit. You get the price before we start, and the gate is left working and safe before we leave.

We answer 24/7

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Trusted Electric Gate Repair for Knoxville Homeowners

When an automatic driveway gate stops moving, the property has a problem that goes beyond inconvenience: a gate stuck open leaves the house exposed, and a gate stuck closed cuts off the people who live there. Electric gate repair in Knoxville means getting the operator, control board, sensors and wiring diagnosed correctly the first time, by a technician who works on the brand already bolted to your driveway. Our technicians have up to experience across residential openers and commercial access systems, and they’ll tell you plainly whether a repair makes sense or a replacement does. We answer 24/7 and dispatch Sunday through Friday from 7am to 7pm, so a dead gate in Farragut or Powell doesn’t have to sit broken overnight. Call (866) 361-6964 for a free estimate.

Call (866) 361-6964

Gate Opener Repair

Gate Opener Repair is the work of diagnosing and fixing the motor unit and its controls when the gate stops responding, moves partway, reverses unexpectedly or makes a grinding noise on every cycle. You need it as soon as the gate behaves inconsistently, because small faults in a LiftMaster or Mighty Mule opener tend to grow into a stalled gate. We test the operator, the control board, the limit settings and the safety devices, then explain what failed before anything is touched. Typical repairs in Knoxville are estimated per job after we’ve seen the system, and the written estimate you approve is the price you pay.

Opener Symptom Diagnosis

A gate that opens but won’t close, or closes a few feet and reverses, usually has a sensor or limit issue rather than a dead motor. We trace which device is sending the stop signal instead of guessing at parts. That keeps the repair tied to the actual cause.

Board and Component Replacement

Control boards, capacitors, receivers and terminal blocks fail with age, lightning surges or water intrusion into an undersized enclosure. We match the replacement to the existing platform so the rest of the system keeps working. Nothing gets swapped without the estimate in front of you first.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Automatic Gate Repair

Automatic Gate Repair covers everything that makes a gate move on its own: the operator, the arm or rail it drives, the sensors, the wiring between them and the gate’s own hardware. It’s what you call when a swing gate drifts open, a slide gate jumps the track, or a safety beam stops the cycle for no visible reason. Our technicians work on both swing and slide systems and on the full range of brands, including FAAC and BFT equipment. We repair more often than we replace, because brand-agnostic diagnostics point to what the system actually needs. Knoxville pricing is set per job by a free written estimate agreed before work starts.

Swing and Slide Gate Mechanics

Swing arms wear at the pivot, and slide gates wear at the rollers and the guide track, which is why a dragging gate overloads an otherwise healthy motor. We look at the mechanics before blaming the electronics. A gate that binds will keep burning out operators until the movement itself is corrected.

Safety Sensor Restoration

Photo eyes, safety edges and loop detectors exist to stop a gate on contact or obstruction, and a bypassed sensor is a hazard, not a fix. We get them working again rather than disabling them. If a property manager has been told to “just unplug it,” that advice needs undoing.

Electric Gate Motor

Electric Gate Motor describes the drive unit itself, the part that turns electricity into a gate that swings or slides under its own power. When a motor hums without moving, labors on every cycle, overheats or has stopped altogether, the problem may be the motor, the power feed, or a mechanical load it can’t overcome. Our technicians test the motor under load and check the supply side before recommending a replacement, because a motor swapped onto a binding gate fails the same way. We handle heavy-duty operators as well as residential units, and we’ll tell you honestly when a motor is at the end of its life. A free on-site estimate in Knoxville sets the price before any work begins.

Questions about your gate repair?Free estimate, price agreed before work starts
Call (866) 361-6964

Motor Load and Power Checks

A motor straining against a stiff gate draws more current and runs hotter, which is why we measure the draw rather than listen to it. Checking the supply feed rules out a voltage problem that mimics a dead motor. Poor connections at the disconnect are a common and inexpensive culprit.

Operator Replacement Decisions

Some motors are rebuildable and some aren’t, and the decision comes down to parts availability and the condition of the rest of the system. We lay out both paths so you can choose. You’ll never be steered toward a new operator simply because it’s easier to sell.

Gate Access Control

Gate Access Control is the layer that decides who gets in: keypads, card readers, remote receivers, telephone entry systems, loop detectors and the intercom wiring that connects them. When remotes stop working, codes fail, the keypad goes dead, or the gate opens for no one, the fault is usually in the access hardware or its wiring rather than the motor. We diagnose and repair these systems on residential driveways and on multi-user commercial entries, including DoorKing equipment. If you’ve been told your whole system needs replacing, a second opinion costs you nothing. The free written estimate in Knoxville tells you what the fix involves and what it costs.

Keypad and Reader Faults

Dead keypads and card readers often trace back to a failed power supply or a corroded splice in the pedestal. We test the feed at the device rather than assuming the reader itself has failed. That distinction saves you the price of a part you didn’t need.

Loop and Intercom Wiring

Buried loop detectors take a beating from vehicles, freeze-thaw ground movement and moisture in the saw cut. When a loop goes bad, the gate may refuse to close or refuse to open on approach. We isolate the loop and its lead-in wire before any cutting is discussed.

Commercial Gate Operator

Commercial Gate Operator refers to the heavy-duty units that move traffic at apartment complexes, storage facilities, gated communities and business parks, where a gate that fails during the day means vehicles queuing and access records going blank. These operators run far more cycles than a driveway gate and fail on different schedules. A stuck-open commercial gate is a security and liability exposure, not a household annoyance. Our technicians work on industrial-grade platforms including FAAC and DoorKing, and we understand that a property manager needs a clear diagnosis and a firm price, not a running list of possibilities. Commercial repairs in Knoxville are quoted per job by written estimate.

High-Cycle Wear Points

At high cycle counts, the first things to go are the clutch, the brake, the rollers and the drive chain. We inspect those before condemning the operator. That’s where commercial money is usually spent, and where the fix is often smaller than expected.

Keeping Access Running

A commercial gate left in manual mode creates a security hole and shifts the burden onto staff. We prioritize getting the operator back in automatic service with its safety devices intact. Access control records and tenant expectations depend on it.

Want to talk it through?Free estimate, price agreed before work starts
Call (866) 361-6964

Brands We Service

We work on LiftMaster equipment, which covers a large share of residential driveway operators and light commercial units, and we know where those systems wear: the limit assembly, the gear case and the receiver. We also service Mighty Mule openers, the entry-level units common on residential gates, where the most frequent failures are the control board and the battery backup. On the commercial side, we work on FAAC and BFT operators, including heavy swing and slide systems where the hydraulics, the encoder and the control logic all have to agree before the gate behaves.

If your gate carries a brand you haven’t seen on this list, whether you have LiftMaster, Mighty Mule, FAAC or any other make, we can help. We diagnose by how the system behaves, not by what we’d prefer to sell.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need a price for your gate repair?Free estimate, price agreed before work starts
Call (866) 361-6964

Signs You Need a Pro Right Now

  • The gate reverses without touching anything. A safety device is tripping mid-cycle or the limits have drifted. Until it’s corrected, the gate can strike a vehicle or a person using it.
  • The operator hums but the gate doesn’t move. This usually points to a seized mechanism, a failed capacitor or a dead motor. Continued attempts to cycle it can burn out the board.
  • The gate moves slowly or labors through part of the travel. A dragging gate overloads the motor and shortens its life with every cycle. It’s cheaper to fix the cause than to replace the motor.
  • The gate sits open and won’t close. This is a security gap, and on a commercial property it’s an access record problem too. A stuck-open gate invites exactly the traffic the gate was installed to stop.
  • Something is sparking, smoking or buzzing at the control box. Stop cycling the gate and keep people away from the operator. Electrical faults at the enclosure are a hazard and need a trained technician.

Our Process, Step by Step

  1. 1
    Phone diagnosis and scheduling. We ask what the gate is doing, what brand it is and whether it’s swing or slide, because that tells us what to expect before we arrive. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. You get a real appointment, not a window that keeps moving.
  2. 2
    On-site inspection. Our technician checks the gate’s mechanical movement first, then the operator, then the controls. We test the safety devices properly rather than assuming they work.
  3. 3
    Electrical and control testing. We measure motor draw, check the supply feed and trace the low-voltage wiring for the sensors and access hardware. That’s how we separate a dead operator from a wiring fault that only looks like one.
  4. 4
    Written estimate before work. You receive the diagnosis in plain language and a written price for the repair. Nothing starts until you approve it. The estimate is free, and the number you agree to is the number you pay.
  5. 5
    Repair and cycle test. Once the work is done, we run the gate through full open-and-close cycles with the safety sensors live and confirm the access hardware works. You see it working before we leave.

How Much Does Electric Gate Repair Cost in Knoxville?

Electric gate repair in Knoxville is priced per job, and the written estimate you approve sets the final number. A typical opener or control board repair runs in the low hundreds depending on the brand and how deep the fault goes. Motor or operator replacement, heavier mechanical work on a binding gate, and buried loop or access control wiring repairs all sit higher because of parts and labor time. Knoxville’s freeze-thaw swings through winter and spring work the gate’s footing, hinges and track, so a gate that moved freely last fall can start dragging in March without anything being “wrong” with the motor. That’s a mechanical cause with an electrical symptom, and it’s why we inspect movement before parts.

Several things move the price: the brand and whether the platform is residential or commercial, whether the fault is a single component or a chain of them, how accessible the operator and control enclosure are, and whether the wiring needs to be run or only repaired. You avoid overpaying by getting a diagnosis rather than a sales pitch. If someone quotes a full operator replacement without testing the gate’s movement, get a second opinion.

The free estimate includes the on-site inspection, the diagnostic testing and a written price for the repair in plain language. We answer 24/7 at (866) 361-6964. Fast dispatch from 7am to 7pm, Sunday through Friday.

Questions about your gate repair?Free estimate, price agreed before work starts
Call (866) 361-6964

Our Service Area Near Knoxville

We cover electric gate repair across Knoxville and the surrounding communities, including Powell, Halls, Farragut, Alcoa, Seymour, Clinton, Maryville, Oak Ridge and Sevierville. Properties closer to the city core and the Powell and Halls corridors are usually reached fastest, with the outer towns scheduled around distance and traffic. If your gate is in one of those areas, tell us on the call and we’ll confirm scheduling. You can also read more about electric gate repair in Powell and electric gate repair in Halls, or see our full gate repair Knoxville service.

Serving Knoxville, TN – Our Local Coverage Area

We serve Knoxville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Electric Gate Repair in Knoxville

Schedule Your Electric Gate Repair Service in Knoxville Today

A gate that won’t run costs you security, access and time. Our technicians diagnose the actual fault on brands from LiftMaster to FAAC and BFT, give you a written price before any work starts, and often complete the repair the same day. The estimate is free and there’s no obligation. Call (866) 361-6964. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Gate Repair Knoxville.

Why Knoxville Chooses Gate Repair Knoxville

We set the standard for electric gate repair in Knoxville.

30-60 Min Response

Fast dispatch across Knoxville, 7am-7pm. Same-day service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Knoxville

Getting your electric gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your electric gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Knoxville - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local electric gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Knoxville Customers Say

Trusted by homeowners across Knoxville and surrounding areas.

★★★★★

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

Emily Ackerman
★★★★★

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

Brooke Whitaker
★★★★★

"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."

Danika Bryant

Ready for Electric Gate Repair in Knoxville?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Knoxville.

(866) 361-6964

Request a Free Estimate in Knoxville

Tell us about your electric gate repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7