Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Maryville, TN
Gate installation in Maryville starts with reading the property, not the catalog. A downtown lot with an original wooden gate and a multi-acre spread off the foothills need different posts, different hardware, and a different conversation about drainage. Our technicians have up to experience, and we work with residential driveway gates and commercial access entries across the Maryville area. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. Call (866) 361-6964 for a free estimate.
Why Maryville Homes Are Different
Maryville sits at the edge of the Smoky Mountain foothills, and that geography shows up in the work. Clay-heavy soil holds water after the heavy spring and summer storms this area gets, and gate posts set decades ago start to lean. A gate that dragged last month may clear the ground this month and bind again after the next round of rain. Winter freeze-thaw cycles swell wooden gates until they stick in the frame, and metal gates rust first at the hinges and latches.
The housing stock splits the calls in two. Downtown and the older blocks in the 37801 and 37802 ZIP codes carry original wood and chain-link gates that have never been serviced, so the job is often worn hinges and latches, not a simple adjustment. The 1960s through 1990s subdivisions in 37803 and 37804 run vinyl and ornamental metal. Out on the rural acreage, long driveways mean heavy-duty and farm gates, and those need reinforced posts set to proper footing depth before anything else is worth doing.
Grade and drainage shift from one Maryville property to the next, which is why we look at how water moves across the driveway before we quote hardware. A gate that sags after every storm usually has a footing problem underneath it, and no amount of adjustment fixes that for long.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Maryville Services
Most Maryville calls land in one of two places: a gate that needs repair, or an electric gate whose operator, control board, or wiring has quit. Both are handled directly.
Gate Repair in Maryville
Gate repair in Maryville covers the mechanical side first: hinges, latches, rollers, tracks, sagging posts, and gates that bind after heavy rain. On older downtown properties the gate is often original to the house, and the repair is replacing hardware that has worn through rather than adjusting something that still has life in it. We check the footing and the grade before touching the hardware, because a leaning post will pull a new hinge out of line within a season. For a full look at how we handle this work, see Gate Repair in Maryville.

Electric Gate Repair in Maryville
Electric gate repair in Maryville means the operator, the control board, the loop detectors, and the wiring run. A gate stuck open is a security gap on a property; a gate stuck closed is an access problem for everyone who lives or works behind it. We diagnose across competing manufacturer platforms, so the recommendation follows what the system actually needs rather than what happens to be on hand. The full breakdown lives on our Electric Gate Repair in Maryville page.

Gate Installation in Maryville
Gate installation in Maryville has to account for soil that moves and a climate that works on wood and metal all year. On the 1960s through 1990s subdivisions in 37803 and 37804, a new gate usually replaces a builder-grade unit that has reached the end of its hardware; on rural acreage, it’s a first gate across a long driveway, and the posts carry more load than the gate itself. We measure on site, set the price in writing before any work starts, and handle the power run and the safety edges as part of the same job. You can see the full scope of what we install on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re manually opening and closing a driveway gate several times a day, or the existing operator has failed and the gate has been propped open since.
What it costs in Maryville
Automatic gate installation in Maryville typically runs $3,200 to $7,500 depending on gate size, operator class, and how far the power has to travel, with the written estimate setting the final price.
How we do it
We measure the opening, check the grade and drainage, set the posts to proper footing depth in the clay soil, mount the operator, and run the power and safety edges before we test the full cycle with you.
Driveway Gate Installation
Signs you need it
The driveway is open to the road, the old gate has rusted through at the hinges, or a leaning post has made the current gate unusable.
What it costs in Maryville
A new driveway gate in Maryville is typically $1,800 to $5,500 for the gate and posts, before any operator or automation is added.
How we do it
We lay out the opening against the driveway line, set reinforced posts to the right depth for the soil, hang the gate so it clears through its full swing, and fit the latches and stops.
What Gate Installation Costs in Maryville
| Item | Typical range in Maryville |
|---|---|
| Driveway gate and posts | $1,800-$5,500 |
| Automatic gate installation | $3,200-$7,500 |
| Sliding gate installation | $3,000-$8,000 |
Can you install a gate on a sloped or clay-heavy Maryville driveway?
Yes. Sloped and clay-heavy driveways are common here, and they change the post depth and footing, not whether a gate can go in. We check drainage and grade on site and quote the footing work in writing.
Do you handle the power run and the safety edges on a new gate?
Yes. The power run and the safety edges are part of the installation, not a separate trade you have to coordinate. Both are covered in the written estimate before any work begins.
Brands We Service in Maryville
We work on the brand already on your property, including LiftMaster, FAAC, BFT, Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, and Elite. That spans residential openers and commercial access systems, and it means diagnostics follow the system rather than a single product line. We don’t stock parts; we identify what’s needed and schedule the fix. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Maryville, TN
| Service | Typical range in Maryville |
|---|---|
| Gate adjustment or hinge and latch replacement | $150-$400 |
| Post reset or reinforcement | $250-$700 |
| Gate operator repair | $250-$650 |
| Control board replacement | $300-$800 |
| Loop detector or safety sensor repair | $200-$550 |
| Wiring repair | $200-$600 |
| Driveway gate and posts | $1,800-$5,500 |
| Automatic gate installation | $3,200-$7,500 |
| Sliding gate installation | $3,000-$8,000 |
Price in Maryville moves with the footing work: clay soil and a sloped driveway can mean deeper posts and more excavation than a flat lot. Gate weight and operator class matter too, since a heavy ornamental gate on rural acreage needs a commercial-grade operator rather than a residential one. Whatever the job, the price is quoted and agreed before any work starts, and the written estimate sets the final number.
Neighborhoods We Serve in Maryville
We cover gate work across Maryville, from the older blocks near downtown out to the rural properties on the edges of town. Downtown properties and the surrounding historic streets often have original wooden and chain-link gates that need hardware replacement. The 1960s through 1990s subdivisions carry vinyl and ornamental metal gates, and the rural acreage on the outskirts has long driveways with heavy-duty and farm gates. Wherever you are in Maryville, we schedule the visit in a single dispatch window and confirm the time with you.
- Downtown Maryville
- Historic neighborhoods near downtown
- Subdivisions in 37803 and 37804
- Rural acreage properties on the outskirts
Service Area – Cities Near Maryville
Maryville sits close enough to our wider coverage that gate work in the surrounding towns is scheduled the same way. If you’re just outside the city line, we can still help. We cover Alcoa, TN next door, Farragut, TN to the west, Seymour, TN to the east, and Knoxville, TN to the north. If you’re unsure whether your address falls inside the area, call and we’ll confirm. For the wider picture of what we do across the region, start with Gate Repair Knoxville.
Serving Maryville, TN – Our Local Coverage Area
We serve Maryville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Maryville
We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday, with same-day service when the schedule allows. A call outside dispatch hours is booked into the next opening. Call (866) 361-6964 for a free estimate.
That depends on the gate and the property, so ask the city about permits before work starts. Some installations need one and some don’t, and HOA rules can add their own requirements. We’ll tell you what we know and put everything in the written estimate.
Yes. We handle both residential driveway gates and commercial or multi-access properties, including the commercial-grade operators those entries use. That covers LiftMaster, FAAC, BFT, DoorKing, and the rest of the brand list.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Maryville Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Emily Ackerman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Brooke Whitaker"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Danika Bryant