Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Alcoa, TN
If you need a gate installed in Alcoa, TN, the job is usually about matching a gate to a property that wasn’t built for one. Alcoa’s older mill-worker homes sit on small lots with short driveways pulled tight to the street, so a swing gate’s arc has to be measured against the house before anything is ordered. Add East Tennessee’s humid summers, wet springs, and winter freeze-thaw, and a gate here has to be hung and anchored to survive real weather. We install and repair residential and commercial gates across Alcoa. Call (866) 361-6964 for a free estimate.
Why Alcoa Homes Are Different
Alcoa is a company town, and the housing tells that story. The 1940s through 1970s brick ranches and small bungalows around the former Aluminum Company of America plant were built on compact lots, and a lot of those driveways leave you a narrow opening and a short setback between the street and the car. A sliding gate fits some of these; a swing gate often needs the arc checked against the house, a fence line, or a neighbor’s property line before a design is final.
Then there’s the metal itself. Gate work here is heavier than in most of the region. Mill-adjacent properties, riverfront homes near the Little Tennessee, and long-established subdivisions like Springbrook tend to carry wrought-iron and steel driveway and security gates rather than the light ornamental aluminum common in newer suburbs. Industrial fallout and grit from the smelting corridors, plus hard water runoff on the older streets, push rust and hinge fatigue along faster than in Maryville or Knoxville a few miles away. That means welds and hinges are the first thing we look at on any gate in Alcoa.
Permits and HOA rules vary by property. Most cities require a permit for a permanent gate or its footings, so ask Alcoa’s building department before we order materials, and check with an HOA before choosing a style or height.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Alcoa Services
The two jobs Alcoa property owners call us about most are gate repair and electric gate repair, and both are covered on their own pages.
Gate Repair in Alcoa
A gate that won’t close is a security gap on a mill-adjacent property and an access problem on any lot. Repair work in Alcoa usually starts with the metal: rust-through at welds, seized hinges, a post that has heaved after a wet spring, or a sagging frame from years of storm strain. We look at whether the fix is a repair or a rebuild before we recommend anything. For driveway and security gates on older Alcoa lots, see Gate Repair in Alcoa.

Electric Gate Repair in Alcoa
When the gate itself is sound but the automation isn’t, the problem moves to the operator, control board, loop detector, or wiring. Alcoa’s summer thunderstorms and winter ice loading stress automated systems, and a safety loop that won’t read a car is a liability on any commercial entry. We handle control-board and operator diagnostics directly, including brands like DoorKing and Elite, without sending the work elsewhere. Our Electric Gate Repair in Alcoa page covers the full range.

Gate Installation in Alcoa
Installing a gate in Alcoa means working around two things at once: a housing stock built when a swing arc wasn’t part of the plan, and an industrial climate that punishes bare or poorly sealed metal. Our Gate Installation work starts with a measurement of the actual opening, not a catalog number. On the older brick ranches and bungalows, that often means a slide gate on a short drive where a swing gate would foul the house, while the larger riverfront and acreage properties near the Foothills can carry a full swing gate with room for it to travel. There are experience behind these decisions, and we work across residential openers and commercial-grade operators alike, so the gate and the operator get specified together rather than bolted together later.
Because grit and fallout here attack welds early, we specify finishes and hardware with that in mind, and we set posts to proper footing depth so an East Tennessee freeze-thaw cycle doesn’t heave them the first or second winter. The written estimate fixes the price before any work starts, and the gate is ordered to fit what we measured.
Driveway Gate Installation
Signs you need it
A narrow driveway pulled close to the house, a street-facing lot with no real privacy, or an existing gate that sags no matter how often it’s adjusted all point to a measured new driveway gate rather than another repair.
What it costs in Alcoa
Driveway gate installation in Alcoa typically runs $2,500 to $8,000, and the written estimate sets the final price.
How we do it
We measure the opening and check the swing or slide path against the house and lot lines, set the posts to proper footing depth, hang the gate, and align and test it before we finish.
Electric Gate Installation
Signs you need it
An access-controlled entry that has to open without a driver leaving the car, or a manual gate that’s hard to pull in the wet and cold, is a candidate for an electric operator.
What it costs in Alcoa
Electric gate installation in Alcoa typically runs $3,500 to $9,000, covering the operator and electrical work, and the written estimate is the final price.
How we do it
We size the operator to the gate’s weight and travel, run the power and safety edges, set the loop detectors if the entry needs them, and test every safety input before the gate goes into service.
What Gate Installation Costs in Alcoa
| Item | Typical range in Alcoa |
|---|---|
| Driveway gate installation | $2,500 – $8,000 |
| Electric gate installation (operator and electrical) | $3,500 – $9,000 |
| Sliding gate installation | $3,000 – $7,500 |
Do I need a permit to install a gate in Alcoa, TN?
Most cities require a permit for a permanent gate and its footings, so ask Alcoa’s building department before we order materials. HOA rules can also limit style and height, so check those early in the process. Call (866) 361-6964 for a free estimate.
How long does a gate installation take in Alcoa?
Most residential gate installations in Alcoa take one to two days on site once the gate and operator have arrived, though custom steel and finish work can push the order time out. Call (866) 361-6964 for an on-site estimate and a written price.
Brands We Service in Alcoa
We work across the platforms that actually turn up on Alcoa gates, including Ghost Controls and Mighty Mule on the residential side, and DoorKing, FAAC, BFT, and Elite on commercial and heavier residential entries. Parts are ordered to the job rather than assumed on a shelf, so turnaround depends on the brand and the specific component. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Alcoa, TN
| Service | Typical range in Alcoa |
|---|---|
| Gate repair (hinges, welds, alignment, hardware) | $150 – $600 |
| Electric gate repair (operator, control board, sensors, wiring) | $200 – $900 |
| Loop detector or safety sensor repair | $150 – $500 |
| Driveway gate installation | $2,500 – $8,000 |
| Electric gate installation (operator and electrical) | $3,500 – $9,000 |
| Sliding gate installation | $3,000 – $7,500 |
In Alcoa, heavy steel and wrought-iron gates cost more to install than light ornamental aluminum because the posts, footings, and hardware have to carry real weight, and industrial fallout and hard water runoff on the older streets can add prep and finish work to a repair. The written estimate sets the final price, and it’s quoted and agreed before any work starts.
Neighborhoods We Serve in Alcoa
We handle gate installation and repair across Alcoa’s older and newer properties alike, from the streets near the former Aluminum Company of America plant to the subdivisions off the river, and the shorter setback lots in the older blocks shape how we spec a swing or slide gate. Whether it’s a compact mid-century driveway in 37701 or a longer run on a riverfront lot, the measurement comes first. Dispatch to Alcoa is fast from 7am to 7pm, Sunday through Friday. Call (866) 361-6964. We answer 24/7.
- Springbrook
- Properties near the former Aluminum Company of America plant
- Riverfront homes along the Little Tennessee
- Lots near the Foothills
- Newer subdivisions and acreage properties
Service Area – Cities Near Alcoa
Alcoa sits close to a tight cluster of East Tennessee towns, and we cover the gate work in that circle. We repair and install gates in Maryville, TN, just up the road, and across Farragut, TN and Knoxville, TN. We also serve properties out toward Seymour, TN. Call (866) 361-6964 for a free estimate. Fast dispatch, 7am-7pm, Sunday through Friday.
Serving Alcoa, TN – Our Local Coverage Area
We serve Alcoa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Alcoa
Fast dispatch to Alcoa runs 7am to 7pm, Sunday through Friday, and repairs are often same-day. We answer the phone 24/7, and a call outside dispatch hours books into the next opening. Call (866) 361-6964 for a free estimate.
Most cities require a permit for a permanent gate and its footings, so ask Alcoa’s building department early, and check any HOA rules on style, height, and setback before ordering. We can help you plan the install around those limits. Call (866) 361-6964.
We serve Alcoa and the nearby East Tennessee cities of Maryville, Farragut, Knoxville, and Seymour for gate installation and repair. If you’re just outside that circle, call (866) 361-6964 and we’ll confirm coverage and scheduling.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Alcoa Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Emily Ackerman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Brooke Whitaker"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Danika Bryant