Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Knoxville, TN
If you’re looking for a gate company in Knoxville, TN, the first thing to know is that installation here is rarely a flat-lot job. Knoxville’s gates hang off masonry piers, cedar posts, and wrought-iron frames on sloped ground from Fountain City down to the foothills off Chapman Highway, and the clay-and-rock soil underneath moves with every wet spring. We install new driveway and privacy gates built for that reality, and we repair the ones the hillside has thrown out of line. Call (866) 361-6964 for a free estimate. Our technicians have up to experience.
Why Knoxville Homes Are Different
Knoxville sits in a humid subtropical valley with wet springs, muggy summers, and occasional hard freezes and ice storms. That mix swells wood, seizes hinges, and cracks masonry piers. Heavy rain on clay soil causes post heave and settling that throw a gate out of alignment months after it looked fine. The city’s housing stock runs from 1920s-1950s brick bungalows and four-squares in Old North and Parkridge to mid-century ranches and 1990s-2000s suburban builds in West Knoxville and Farragut, and most gates hang off masonry, cedar, or iron on a grade. On Knoxville’s steep, wooded lots across Ridgewood, Fountain City, and the foothills off Chapman Highway, driveway and privacy gates are constantly fighting slope, runoff, and root heave. So gate work here is as much about re-plumbing sagging hinges and resetting posts in hillside soil as it is fixing the operator. In the older 1920s-50s neighborhoods, rust and wood rot on ornamental iron and cedar gates make post-and-hinge resetting the bread-and-butter call rather than new installs.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Knoxville Services
Two jobs bring most Knoxville homeowners and property managers to the phone: a gate that has stopped working, and a gate that needs to be replaced or installed for the first time.
Gate Repair in Knoxville
Most of the gate repair we do in Knoxville starts with a gate that’s dragging, sagging, or catching on the ground rather than a broken motor. After an ice storm or a wet spring, ornamental iron driveway gates on Ridgewood and Sequoyah Hills hillsides routinely drop because the downhill post settled in the clay. The operator is fine, but the gate is binding and the opener has been straining for months. We reset posts, re-plumb hinges, and rebuild the hardware so the gate swings true again. For sagging, sticking, or storm-damaged gates, see Gate Repair in Knoxville.

Electric Gate Repair in Knoxville
When a gate stops responding, the cause is often electrical: a control board, a loop detector, a safety edge, or wiring that has taken on water. We work on operators, control boards, sensors, and wiring across LiftMaster, FAAC, BFT, and the other platforms we service, so diagnostics are driven by what the system actually needs. A gate stuck open is a security gap and a gate stuck closed is an access emergency, and both get our attention. For automated systems, see Electric Gate Repair in Knoxville.

Gate Installation in Knoxville
Gate Installation in Knoxville means planning for slope, runoff, and soil before anything gets set in the ground. The 1920s-1950s brick bungalows and four-squares in Old North and Parkridge usually have an existing masonry pier or cedar post line to work from, while mid-century ranches and 1990s-2000s builds in West Knoxville and Farragut often sit on grades that call for a fresh footing and a slide or swing layout that respects the fall of the lot. Our approach to Gate Installation starts with measuring the grade and the clear opening so the gate tracks true through every freeze and wet season, not just on install day. We handle the full job under one provider, from the posts and frame to the operator and the power run.
Automatic Gate Installation
A new automatic gate combines the structural gate with an operator matched to its weight, its travel, and how often it opens each day. In Knoxville’s clay soil, the footing depth and drainage matter as much as the operator brand.
Signs you need it
You’re adding a gated entry or replacing a manual gate you open by hand every time you pull in.
What it costs in Knoxville
Automatic gate installation typically runs $3,500-$8,500 installed, with the operator and power run driving the top of that range.
How we do it
We measure the grade and clear opening, set the posts to proper footing depth with drainage, hang the gate, then mount and program the operator and test the safety edges and loop detectors.
Driveway Gate Installation
A driveway gate is sized to your vehicles and your entrance width, whether it swings on hinges or slides on a track. On sloped Knoxville lots, the track and the swing arc have to be planned around the fall of the ground.
Signs you need it
You want to close off a driveway entrance for security, privacy, or to control who reaches the house.
What it costs in Knoxville
Driveway gate installation typically runs $2,500-$7,500, depending on the material, the width, and whether the operator is included.
How we do it
We lay out the opening, set footings for the hinge posts or the slide track, hang and align the gate leaf, then add the operator and the access controls if you’re automating it.
What Gate Installation Costs in Knoxville
These are typical estimated ranges for the Knoxville market. The written estimate you receive sets the final price.
| Item | Typical range in Knoxville |
|---|---|
| Automatic gate installation | $3,500-$8,500 |
| Driveway gate installation | $2,500-$7,500 |
| Sliding gate installation | $3,000-$7,000 |
Can you install an automatic gate on a sloped Knoxville driveway?
Yes. We set deeper footings and plan the swing or slide arc around the grade so the gate isn’t fighting the hill. On steep lots across Ridgewood and Fountain City, that planning is what keeps the operator from binding later.
Do you handle the power run and the safety edges for a new gate?
Yes. Installation includes the operator, the power run, and the safety edges and loop detectors. We schedule the work after a free measure, and you get a written price before anything starts.
Brands We Service in Knoxville
We work on your brand, including LiftMaster, FAAC, BFT, Mighty Mule, and the rest of the nine name-brand gate systems we cover, from entry-level residential openers to commercial-grade access systems. We don’t claim stocked parts; we diagnose what’s there and order what the fix needs. Typical turnaround depends on the part and the platform, and we tell you what to expect up front. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Knoxville, TN
Every price below is a typical estimated range. The written estimate we give you before any work starts sets the final price.
| Service | Typical range in Knoxville |
|---|---|
| Automatic gate installation | $3,500-$8,500 |
| Driveway gate installation | $2,500-$7,500 |
| Sliding gate installation | $3,000-$7,000 |
| Gate repair (hinge, post, or hardware) | $180-$650 |
| Electric gate repair (operator or control board) | $250-$900 |
In Knoxville, price climbs when the job needs new footings in clay-and-rock soil, a heavier gate material like ornamental iron, or an operator upgrade on top of the install. We quote the job up front and agree the price with you before we start, so the invoice matches the estimate.
Neighborhoods We Serve in Knoxville
We cover gate work across Knoxville, from the older bungalow blocks in Old North and Parkridge to the hillside properties in Sequoyah Hills and the foothills off Chapman Highway, plus the newer suburban builds out toward West Knoxville and Farragut. Slope, soil, and the age of the gate change what the job needs, and we plan around each. Fast dispatch runs 7am to 7pm on repair calls, and we answer the phone 24/7.
- Ridgewood
- Fountain City
- Sequoyah Hills
- Old North
- Parkridge
Service Area – Cities Near Knoxville
Knoxville is the center of our work, and we also take gate calls in the surrounding communities. If you’re just outside the city line, we can still help. We cover Powell, TN, Halls, TN, Alcoa, TN, and Farragut, TN. The same slope and clay-soil conditions run through most of these areas, so the approach to post setting and operator work carries over. Call (866) 361-6964 to check availability for your address.
Serving Knoxville, TN – Our Local Coverage Area
We serve Knoxville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Knoxville
We answer the phone 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Repair calls on a gate stuck open or closed are prioritized, and we’ll give you a clear time when you call.
Most gate installations do require a permit, so ask the city’s building department about your address. If you’re in an HOA, check the rules on gate height, style, and setbacks before we order materials.
We serve Knoxville and nearby communities including Powell, Halls, Alcoa, and Farragut. If you’re unsure whether your address is in range, call and we’ll confirm before scheduling.
Ready to fix a sagging gate or plan a new installation? Call (866) 361-6964 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Knoxville Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Emily Ackerman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Brooke Whitaker"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Danika Bryant