Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Knoxville?
Gate installation in Knoxville typically costs $2,400 to $6,800 for a residential driveway gate, with the gate, posts, hardware and operator bundled into the estimate. A basic single-swing or sliding gate with a light-duty operator usually lands near the low end, while a wide double-driveway gate with a commercial-tier operator and access controls pushes toward the high end. Commercial and multi-access entry systems commonly run $7,500 to $20,000 or more depending on width, automation and entry hardware.
Those are estimated ranges, not a quote. The written on-site estimate sets your final price. Every property is different: a sloped Knoxville driveway in Sequoyah Hills needs footing work a flat lot in Halls doesn’t, and a farm gate off a rural road in Karns is a different job than a refined entry at a West Knoxville office park. We give you the number in writing after we’ve looked at the site.
We’re a dedicated gate installation and repair specialist, working across nine named platforms, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. Call (866) 361-6964. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Residential driveway gate installation in Knoxville typically runs $2,400 to $6,800 installed and automated.
- Commercial and multi-access entry systems commonly land between $7,500 and $20,000 or more.
- Gate material, width, automation tier and site prep drive most of the price.
- We work on nine gate brands by name, from residential openers to industrial access systems.
- Installation and repair come from one provider, so you don’t coordinate two contractors over the life of the gate.
- Free estimates. The written estimate sets the final price.
Gate Installation Cost Breakdown (2026)
Here’s how the pieces of a Knoxville gate project usually price out. Think of these as line items that add together, not standalone quotes.
| Line item | Typical estimated range |
|---|---|
| Single swing gate (driveway width, steel or ornamental) | $900 – $2,600 |
| Double swing gate (two leaves) | $1,600 – $4,200 |
| Sliding gate (rolled or cantilever, supply) | $1,800 – $5,500 |
| Posts, footings and track or rail | $400 – $1,600 |
| Residential swing or slide operator | $600 – $1,400 |
| Commercial-grade operator | $1,400 – $4,000 |
| Access controls (keypad, remote, loop detector, sensors) | $250 – $1,800 |
| Electrical run to the operator | $350 – $1,500 |
| Site prep and grading | $300 – $1,200 |
A complete residential install with automation usually bundles to $2,400 to $6,800. Commercial and multi-access systems commonly run $7,500 to $20,000 or more once you add heavier operators, multiple entry points and full access control.
What pushes a Knoxville project up the range: a wide double gate on a sloped driveway, a longer electrical run, a heavier operator for frequent traffic, or a commercial access system with loop detectors and card readers. What pulls it down: a standard single driveway gate on level ground, a lighter residential operator, and a clean site that’s ready for footings.
Our technicians have up to 9 years of experience, and they’ll walk you through the line items in person so you understand what you’re paying for. Brand-agnostic diagnostics matter here too: because we work across competing manufacturer platforms, we recommend the operator that fits your gate and traffic, not the one a single-brand dealer happens to stock.
What Affects Gate Installation Pricing in Knoxville
- Gate width and style. A single driveway gate is one job; a double gate or a long slide gate is another. Wider openings mean more material, heavier operators and stronger posts. A slide gate needs a runway and clear space to roll, which isn’t always there on a tight Knoxville lot.
- Swing vs. slide. Swing gates are usually simpler on a standard driveway. Slide gates shine where the driveway is short or on a slope where a swing leaf would foul the ground, but they need track and travel space and that adds cost.
- Automation tier. A residential swing or slide operator runs $600 to $1,400. A commercial-grade operator for heavier traffic or a larger gate runs $1,400 to $4,000. Getting this right up front keeps the gate reliable and keeps you from replacing the operator early.
- Site conditions and terrain. A flat lot in Farragut installs easier than a steep drive in the older neighborhoods near downtown, where grading and footing depth cost more. Posts still need proper footing depth regardless of soil or climate, so we plan the footings around what the ground actually gives us.
- Electrical and access controls. Running power to an operator costs $350 to $1,500 depending on distance and whether the trench crosses a drive or landscaping. Add keypads, remotes, loop detectors or sensors and access control runs $250 to $1,800.
- Material and finish. Steel, ornamental aluminum and wood all price differently, and heavier steel gates need heavier operators. Finish choices affect both the gate cost and the automation you’ll eventually need.
How Knoxville’s Geography and Housing Shape the Job
Knoxville sits in a valley ringed by ridges, and that shows up in gate work. Driveways in the hills and the older parts of town often climb or drop, which can rule out a simple swing gate and point toward a slide or cantilever design. Out west toward Farragut and Hardin Valley, newer subdivisions tend to have flatter, longer driveways that suit a double swing gate and a residential operator. Rural and semi-rural properties around Karns and in the surrounding county often need broader gate openings for trucks, trailers and equipment, which changes the posts, the operator and the footprint.
The area’s hot, humid summers and cool winters also matter for the operator and controls. We size electrical runs and housings for the weather the gate actually sees, and we think about how a heavy swing leaf will handle the ground through wet and dry seasons. That’s practical detail that lowers long-term repair calls.
On the residential side, the biggest installation decision is usually swing or slide. For commercial property managers, the priority is access control: vehicle loops, entry keypads, timed access and safety sensors that keep pedestrians out of the gate path. We handle the gate installation and the electric gate side together, so the operator, the wiring and the controls all come from one place, plus ongoing gate repair knoxville whenever something breaks.
How to Save on Gate Installation
There’s no substitute for doing the job right, but a few moves keep your Knoxville gate installation cost reasonable without cutting corners on safety.
- Match the operator to the gate. Putting a light residential operator on a heavy gate costs more in the long run in repairs and early replacement. We size the automation to the gate and to your traffic so you buy once.
- Handle the site before the crew arrives. Clearing the path, confirming where power will run, and deciding the gate position up front reduces site-prep surprises that add to the estimate.
- Consolidate controls. If you know you’ll want a keypad, extra remotes or a loop detector later, plan for them in the initial install so the wiring is done once.
- Think repair vs. replace. If you already have a gate but the operator is failing, an honest diagnosis often finds a control board or wiring fix instead of a full replacement. Our brand-agnostic approach means we’re driven by what the system needs, not what we sell.
- Get a free estimate first. The fastest way to know your number is to have us look at the site. Call (866) 361-6964 for a free estimate.
Why In-House Gate Specialization Keeps Your Costs Honest
A general contractor might get a gate installed. But a gate is a system: gate, posts, operator, controls, wiring and safety. When one provider covers installation and repair across the life of the system, you’re not paying to re-diagnose work a different installer did, and you’re not coordinating an installer and a repair tech who don’t talk to each other.
We work on residential driveways and commercial, multi-access properties, which means the same brand coverage applies whether you’re a homeowner in Corryton or a facility manager running a gated entry at an office park off the interstate. Our brand list spans the full spectrum: DIY-adjacent residential openers like Ghost Controls and Mighty Mule up to industrial-grade systems from FAAC, BFT and DoorKing, plus LiftMaster, Linear, Viking and Elite. Electric and automated gate work, including operators, control boards, loop detectors and wiring, is core here rather than a referral to someone else.
For properties in the wider metro, our knoxville gate service page covers the surrounding communities we serve.
FAQs – Gate Installation Cost
How much does a driveway gate cost to install in Knoxville?
A residential driveway gate in Knoxville typically costs $2,400 to $6,800 installed and automated, depending on width, material, operator tier and site conditions. A basic single gate with a light operator sits near the low end; a wide double gate with a commercial-tier operator and access controls sits near the high end. Call (866) 361-6964 for an exact quote. Estimates are free.
Is it cheaper to repair an existing gate or replace it?
Repair is usually cheaper than replacement when the gate frame and posts are sound and the problem is the operator, a control board, a sensor or the wiring. A common repair runs a fraction of a full install, while a new automated system falls in the $2,400 to $6,800 residential range. We diagnose the brand and tell you honestly which option makes sense. Call (866) 361-6964.
How much does an electric gate operator cost in Knoxville?
A residential swing or slide operator typically runs $600 to $1,400, and a commercial-grade operator runs $1,400 to $4,000. The operator is one line item in a gate installation estimate; the gate, posts, footings and controls add on top. We’ll price the whole system in writing. Call (866) 361-6964.
Can you install a gate on a sloped Knoxville driveway?
Yes. Sloped driveways are common around Knoxville, and they often point toward a slide or cantilever gate rather than a swing leaf that would foul the ground. Footing depth and grading are planned around the slope, which affects the estimate. Call (866) 361-6964 and we’ll look at the site.
Do you handle commercial gate installation too?
Yes. Commercial and multi-access entry systems commonly run $7,500 to $20,000 or more, depending on width, operator and access controls like loop detectors and keypads. We service both residential driveways and commercial properties, so the same brand coverage and access-control expertise apply. Call (866) 361-6964 for a free estimate.
How much does access control add to a gate installation?
Access controls like keypads, extra remotes, loop detectors and safety sensors typically add $250 to $1,800, depending on what you need. Planning them during the initial install saves wiring work later. Call (866) 361-6964 and we’ll build it into your estimate.
What happens when I call?
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Give us the basics on the gate and operator, and we’ll set up a free on-site estimate. Fast dispatch from 7am to 7pm.
Get Your Free Gate Installation Estimate
Whether you’re installing a new driveway gate or upgrading the automation on an existing entry, the number you care about starts with a free on-site estimate. We’ll look at the site, recommend the operator that fits your gate and traffic, and hand you a written price. You’ll know exactly what your gate will cost before any work starts, and you won’t coordinate a separate installer and repair tech down the line. Call (866) 361-6964. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Knoxville.
Pricing reflects the Knoxville market as of 2026. Gate Repair Knoxville offers free estimates – call (866) 361-6964.
What Our Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Emily Ackerman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Brooke Whitaker"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Danika Bryant