Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Knoxville?
Most gate parts and welding jobs in Knoxville run $180 to $950, with common repairs like a hinge replacement, a sagging latch post, or a small weld on a swing gate frame landing at $250 to $450. A single replacement part such as a control board, roller, or loop detector typically costs $120 to $600 installed, depending on the brand and whether it’s a residential or commercial-grade unit. Full gate fabrication and welding of a new frame or custom section is a bigger job, usually $900 to $3,500 once materials, welding, and rehanging are included. The written estimate always sets the final price, and estimates are free.
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so the parts conversation starts with your actual hardware, not a guess. Our technicians have up to 9 years of experience across both residential driveways and commercial access entries, and we handle the weld, the part, and the operator as one job. Call (866) 361-6964 to get a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Gate Parts & Welding Cost Breakdown (2026)
Here’s how gate parts and welding pricing breaks down by line item in the Knoxville area. These are typical installed ranges for a standard residential or light commercial gate. Commercial swing and slide gates, and industrial-grade operators, sit at the higher end because the hardware itself costs more and access control wiring adds labor.
| Job or Part | Typical Cost Range |
|---|---|
| Hinge replacement (per hinge, welded or bolted) | $120 – $280 |
| Gate frame weld repair (sagging, cracked corner, broken weld) | $180 – $450 |
| Latch and striker repair or replacement | $95 – $240 |
| Replacement rollers and track hardware (slide gate) | $150 – $400 |
| Control board replacement (LiftMaster, FAAC, BFT, Linear, DoorKing) | $250 – $600 |
| Loop detector or safety sensor | $180 – $450 |
| Operator arm repair or replacement (residential swing gate) | $350 – $900 |
| Post reinforcement and footing weld (stabilizing a leaning gate) | $275 – $650 |
| Custom gate fabrication and welding (per gate section) | $900 – $3,500 |
| Full automated gate installation (hardware and operator labor) | $2,800 – $7,500 |
What pushes a bill toward the top of those ranges? Three things come up again and again in Knoxville. First, gate brand and tier: a Mighty Mule or Ghost Controls residential operator uses parts that cost far less than a FAAC or DoorKing commercial control board. Second, the condition of the frame: a single cracked weld is one visit, but a frame that’s been sagging for a while can mean straightening and reinforcing the post footing before the weld holds. Third, welding access: a gate that swings over sloping ground or sits tight to a fence line takes longer to set up and brace safely than an open driveway does. The estimate is free, so the fastest way to turn any of these ranges into your number is a call.
What Affects Gate Parts & Welding Pricing in Knoxville
- Gate brand and platform. The nine brands we service span from entry-level residential openers like Ghost Controls and Mighty Mule up to commercial-grade access systems like FAAC, BFT, and DoorKing. Part cost tracks the tier, so a residential control board and a commercial one are not the same price.
- Swing gate vs. slide gate. Slide gates carry rollers, track, and a different operator setup, while swing gates hinge on arms and hinges. The hardware list is different enough that two similarly sized gates can price very differently.
- Weld type and metal. A quick tack weld on steel is one job; repairing galvanized or aluminum gate framing needs different setup and preparation. Heavier commercial panels need more bracing while the weld cools, and that time shows up in the estimate.
- Whether the operator needs to come off. Sometimes the gate has to be unbolted from the operator arm to weld or replace a hinge cleanly. That adds labor, and on automated gates it means the operator gets re-set and tested before we leave.
- Control wiring and access hardware. Loop detectors, keypads, and safety sensors on an automated entry add parts and wiring time. Commercial properties with multiple access points on one controller cost more to sort out than a single driveway gate.
- Knoxville’s freeze and thaw cycles. East Tennessee swings between wet winters and hot summers, and that cycle works on gate posts and footings season after season. A post that has shifted in the ground often needs footing work plus the weld, which is more than the surface repair alone.
Trees are the other local factor. Knoxville yards are full of mature hardwoods, and a fallen limb or a gate that’s been shoved by a downed branch is a common reason people call us. That kind of impact damage often means a bent frame, a snapped weld, and sometimes a strained hinge all at once, so we check the whole gate, not just the obvious break. A gate stuck open is a security gap, and a gate stuck closed is an access emergency. If you’re weighing repair against replacement, our gate repair knoxville page walks through how we diagnose a failing gate before anyone recommends a new one.
Key Takeaways
- Most gate parts and welding jobs in Knoxville run $180 to $950; a typical repair is $250 to $450.
- Control board replacement is $250 to $600 installed, and commercial-grade boards sit at the top of that range.
- Custom fabrication and welding is $900 to $3,500 depending on gate size, metal, and access.
- Post footing work often gets bundled with a weld repair when a gate has been leaning.
- Estimates are free, so the written number beats any general range.
How to Save on Gate Parts & Welding
The biggest lever on cost is catching a problem before it becomes two problems. A hinge that starts to squeak or a weld that shows a hairline crack is a small fix. Let it ride and the hinge pulls the post, the post shifts the footing, and now you’re paying for welding plus footing work on the same gate. A look at the gate once a season, especially after a windy stretch or a heavy rain, tends to keep repairs in the lower part of the range.
Ask for the diagnosis in plain terms. Brand-agnostic diagnostics mean the recommendation is driven by what your system actually needs, so if a Mighty Mule operator has a tired battery and a loose arm, that’s the fix, not a whole replacement. Single-brand dealers sometimes lean toward selling a new system because that’s what they stock. We don’t have that pressure, and we work on the nine brands by name, which means we can tell you honestly when a part swap solves it and when it won’t.
Bundle the repair with anything else that needs attention on the same gate. If the gate needs a weld and the operator needs a new control board, doing both in one visit saves a second return trip. And ask for the estimate in writing, itemized by part and labor, so you can see what you’re actually paying for. That written estimate is what sets the final price, and there’s no charge to get it.
For a wider view of how gate work is priced and what each service covers, our Knoxville page lays out repair, electric gate repair, and installation side by side. Call (866) 361-6964 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Gate Parts & Welding Cost
How much does gate welding cost in Knoxville?
Gate welding in Knoxville typically runs $180 to $450 for a frame weld repair like a cracked corner, a broken hinge mount, or a sagging joint, and $900 to $3,500 for custom fabrication of a new gate section. The lower end is a single repair on an accessible gate; the higher end covers new metal, heavier commercial panels, and labor to rehang and align the gate afterward. Call (866) 361-6964 for an exact quote. Estimates are free.
How much do replacement gate parts cost?
Replacement gate parts generally cost $95 to $900 installed, depending on the part. A latch or hinge sits at the bottom of that range, a control board or loop detector lands in the middle, and an operator arm for a residential swing gate is at the top. Commercial-grade parts for FAAC, BFT, or DoorKing systems cost more than residential parts. Call (866) 361-6964 with your brand and we’ll give you a free estimate.
Is it cheaper to repair the gate or replace it?
Repair is almost always cheaper than replacement. A weld repair or a hinge replacement in the $180 to $450 range solves most gate problems, while a full new automated gate installation is $2,800 to $7,500. Replacement makes sense when the frame is rusted through in several places or the gate has bent beyond safe straightening. We diagnose before recommending, so you get an honest answer. Call (866) 361-6964 for a free estimate.
Can you come out today?
Same-day service is often possible on gate parts and welding work in Knoxville, and it depends on the day’s schedule and the job. A stuck gate is worth a call right away because a gate stuck open leaves the property exposed. Call (866) 361-6964. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do you work on my gate brand?
We service nine named gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range covers entry-level residential openers and industrial-grade commercial access systems alike, so whether your gate is a DIY-adjacent Ghost Controls driveway unit or a DoorKing commercial controller, we can work on it. Call (866) 361-6964 for a free estimate.
Talk to Us About Your Gate
Gate parts and welding in Knoxville come down to the specific hardware on your property, and a free estimate turns a broad range into a real number. Whether you’re a homeowner with a driveway gate that won’t latch or a property manager with a commercial slide gate that’s throwing a fault, we handle the part, the weld, and the operator as one job. Installation and repair both come from the same provider, so you’re never coordinating two contractors across the life of the gate.
Call (866) 361-6964 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Pricing reflects the Knoxville market as of 2026. Gate Repair Knoxville offers free estimates – call (866) 361-6964.
Written by the team at Gate Repair Knoxville.
What Our Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Emily Ackerman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Brooke Whitaker"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Danika Bryant